Cisco Catalyst 8300 Series Посібник з встановлення обладнання - Сторінка 24
Переглянути онлайн або завантажити pdf Посібник з встановлення обладнання для Мережеве обладнання Cisco Catalyst 8300 Series. Cisco Catalyst 8300 Series 46 сторінок. Edge ucpe
Друкувати сторінкуInstalling the Cisco Catalyst 8300 Series Edge uCPE
Warning
To prevent bodily injury when mounting or servicing the unit in a rack, you must take special precautions to
ensure that the system remains stable. The following guidelines are provided to ensure your safety:
• The unit should be mounted at the bottom of the rack if it is only one unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the
Warning
To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using that handles
on modules (such as power supplies, fans or cards); these types of handles are not designed to support the
weight of the unit. Statement 1032
The following figures show a typical rack mounting of a chassis in a rack.
1. Locate the desired position in the equipment rack.
2. Align the holes in the rack mount brackets with the mounting holes in the equipment frame.
3. Secure the device using mounting screws appropriate for your equipment frame. The rack mount brackets
have been designed #12 screws.
4. Tighten the screws to the appropriate torque value for your equipment.
Figure 5. Mounting the Chassis on the Rack- Front (I/O face) shown for 19 inches RM
Cisco Catalyst 8300 Series Edge uCPE Hardware Installation Guide
20
heaviest component at the bottom of the rack.
unit in the rack. Statement 1006.
Install the Cisco Catalyst 8300 Series Edge uCPE