Digitone ProSeries 3 Посібник з експлуатації - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Аксесуари для телефонів Digitone ProSeries 3. Digitone ProSeries 3 16 сторінок.

Друкувати сторінку

Clearing Blocked Numbers List Only

Code 40 # *

To delete just the blocked numbers already stored from using the Block Button or with

the Last Call Remote Entry command of * 2 #, use

Code 40 #

*. This lets you clear

out all the numbers that accumulated over the years and, also retains the known

unwanted blocked entries. All blocked numbers entered through programming Code 40

(not through the front panel BLOCK button) will be stored as Non Auto Delete Numbers

and won't be accidentally erased with this command.

Blocked Number List Auto Delete

Code 46

(Virtual Unlimited Memory Feature)

The DPS3 can manage your blocked calls list automatically with First In and First Out

processing. With 700 memory slots available to block calls, it will be daunting to sort

through them line by line. However, the DPS3 can use virtual memory by allowing the

first calls that may have come in years ago to be deleted automatically upon the

reception of newer calls today. To enable this mode, press and hold the Program Button

for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt

for "Enter Code" displays enter 46, display shows function. To return to the default

Manual delete mode when the prompt for "Enter Code" displays, enter 47.

Block "Private"

Code 48

The DPS3 can block the name Private with or without a phone number. Even though

you may have Anonymous Call Rejection from your phone company, scammers can still

get through just by adding a spoofed number, even your own. However, the DPS3 will

block these calls that display the name as Private with or without a phone number. To

enable this mode, press and hold the Program Button for 3 seconds until you see

"Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays

enter 48, display shows function. To return to the default mode when the prompt for

"Enter Code" displays, enter 49.

Block "Out of Area"

Code 58

The DPS3 can block the name Out of Area with or without a phone number. Scammers

can get through by adding a spoofed number, even your own, when calling in Out of

Area. However, the DPS3 will block these calls that display the name as Out of Area

with or without a phone number. To enable this mode, press and hold the Program

Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the

prompt for "Enter Code" displays enter 58, display shows function. To return to the

default mode when the prompt for "Enter Code" displays, enter 59.

Inviting Calls

Inviting Individual Callers

Code 50

Note that all callers with valid phone numbers are invited by default, so you don't need

to invite callers one at a time. However, if you are using the Global Block Method, then

this feature is useful for inviting callers that would otherwise be blocked. You can store

in individual callers as they call in like family, friends and business associates by using

the

GREEN

Invite Button on the front panel or use Program Code 50. To enable this

feature, press and hold the Program Button for 3 seconds until you see "Program

Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays enter 50 to

store a full number followed by the * key. Example for an Invited number enter: 50,

894 555 1212 *. Store up to 80 numbers or area codes.