ACU-RITE SENC 150 Посібник з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник з монтажу для Конвертер мультимедіа ACU-RITE SENC 150. ACU-RITE SENC 150 8 сторінок. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
Також для ACU-RITE SENC 150: Довідковий посібник (20 сторінок), Посібник з монтажу (4 сторінок), Посібник з монтажу (6 сторінок), Інструкція з експлуатації (12 сторінок)

Друкувати сторінку
SENC 150
Align to within .010" TIR
of the axis travel or table top
Transfer punch
other end mounting
hole
•
Fasten the encoder assembly at one end.
•
Align the top of the encoder to the axis travel or table
top surface.
•
Transfer punch the second end mounting hole, and
remove the encoder.
•
Drill and tap hole location for a 1/4-20 x 1/2" deep.
•
Attach the encoder to the table.
Align to within .010" TIR
of the axis travel or table top
•
Align the top of the encoder to within .010" TIR.
•
Secure the encoder in place maintaining alignment.
P.N. 385072-208 Ed B 2/06
surface
* 1/4-20 x 1" BHCS
and flat washer
* 1/4-20 x 1" BHCS
and Flat washer (2)
surface
Installation Manual 385072-38
Encoder Installation Manual For: Vertical Knee Mill
Longitudinal X Axis on Rear of Table
Center support installation ...
•
Insert the center support to the top of the scale case
above the center location tag.
•
Ensure that the center support interlocks with the
scale case.
**Center
support
•
Align the center of the scale case to within .010" to
the ends, and transfer punch the support hole
location.
•
Remove the center support, drill and tap the hole
location for an 8-32 x 1/2" deep.
•
Attach the center support to the scale case and table.
Align the center of the scale case with each end to
within .010" and secure in place.
Reading head installation ...
Align center marks
•
Return the table to its center of travel.
•
Transfer punch bracket mounting slot centers to the
saddle.
•
Remove the bracket from the reading head.
•
Drill / tap hole locations for 1/4-20 x 1/2" deep.
3
Center support
**1/4-20 x 3/4" BHCS
& Flat washer
Transfer punch mounting slot centers
Acu-Rite Companies Inc.