Cisco Content Engine 565 Посібник з монтажу - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник з монтажу для Мережеве обладнання Cisco Content Engine 565. Cisco Content Engine 565 28 сторінок. Content engine
Друкувати сторінку
Safety Guidelines
1
3
5
7
The right and left slide rails are identical.
Note
Safety Guidelines
To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment, observe the
following precautions.
Never defeat the ground conductor or operate the equipment in the absence of a suitably installed
Warning
ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are
uncertain that suitable grounding is available.
The safety cover is an integral part of the product. Do not operate the unit without the safety cover
Warning
installed. Operating the unit without the cover in place will invalidate the safety approvals and pose
a risk of fire and electrical hazards.
Warning
Blank faceplates and cover panels serve three important functions: they prevent exposure to
hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)
that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not
operate the system unless all cards, faceplates, front covers, and rear covers are in place.
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
This unit is intended for installation in restricted access areas. A restricted access area is where
Warning
access can only be gained by service personnel through the use of a special tool, lock and key, or
other means of security, and is controlled by the authority responsible for the location.
Class 1 laser product.
Warning
Installing the Cisco Content Engine 510 and 565
10
Slide rail assemblies (2)
M4 screws (6)
Clip nuts (10)
Cage nut insertion tool (1)
2
M3.5 screws with lock washers (3)
4
M6 screws (10)
6
Cage nuts (10)
78-14731-02