Cisco Firepower 4110 Посібник - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник для Мережеве обладнання Cisco Firepower 4110. Cisco Firepower 4110 8 сторінок. Rack-mount and ground the chassis
Також для Cisco Firepower 4110: Посібник з технічного обслуговування та модернізації (20 сторінок), Посібник (36 сторінок), Посібник (26 сторінок), Посібник (42 сторінок), Початок роботи (42 сторінок)

Rack-Mount and Ground the Chassis

Warning

Step 1

Attach a rack mount bracket to each side of the chassis using the six 8-32 x .375-inch Phillips screws provided in the

accessory kit.

Figure 1: Attach the Rack Mount Bracket to the Side of the Chassis

Chassis

8-32 x .375-inch Phillips screws (three per side)

Step 2

Attach the inner rails to the sides of the chassis:

a) Remove the inner rails from the slide rail assemblies.

b) Align an inner rail with one side of the chassis so that the three keyed slots in the rail align with the three pegs on the

side of the chassis.

Statement 1032 Lifting the Chassis

To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the

handles on modules, such as power supplies, fans, or cards. These types of handles are not designed to

support the weight of the unit.

Statement 1047—Overheating Prevention

To reduce the risk of fire or bodily injury, do not operate the unit in an area that exceeds the maximum

recommended ambient temperature of 104°F (40°C).

Rack-mount bracket

Rack-Mount and Ground the Chassis

Rack-Mount the Chassis