Cisco Firepower 4125 Посібник - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник для Мережеве обладнання Cisco Firepower 4125. Cisco Firepower 4125 8 сторінок. Rack-mount the chassis
Також для Cisco Firepower 4125: Посібник (38 сторінок), Початок роботи (42 сторінок)
Друкувати сторінку
Ground the Chassis
What to do next
Ground the chassis. See
Install the cables according to your default software configuration as described in the
for your version.
Ground the Chassis
Take note of the following warnings:
Warning
Statement 1024 Ground Conductor
This equipment must be grounded. To reduce the risk of electric shock, never defeat the ground conductor or
operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical
inspection authority or an electrician if you are uncertain that suitable grounding is available.
Warning
Statement 1046 Installing or Replacing the Unit
To reduce risk of electric shock, when installing or replacing the unit, the ground connection must always be
made first and disconnected last.
Warning
Statement 1025 Use Copper Conductors Only
To reduce risk of fire, use copper conductors only.
Caution
Grounding the chassis is required, even if the rack is already grounded. A grounding pad with 2 threaded M4
holes is provided on the chassis for attaching a grounding lug. The ground lug must be NRTL-listed. In
addition, a copper conductor (wires) must be used and the copper conductor must comply with NEC code for
ampacity.
Before you begin
• You need the following items that you provide:
• You need the following items from the accessory kit:
Rack-Mount the Chassis
6
Ground the Chassis, on page 6
• Wire-striping tool
• Crimping tool
• Grounding cable
• Two star lock washers for the 10-32 x .375-in. screws used to secure the ground lug
• Ground lug #6 AWG, 90 degree, #10 post
for the procedure.
Rack-Mount the Chassis
Getting Started Guide