argon audio BASS10 Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Спікери argon audio BASS10. argon audio BASS10 8 сторінок.
Environmental information
Argon BASS8 Subwoofer complies with international
directives on the Restriction of Hazardous Substances
Electrical and Electronic Equipment (WEEE) - the crossed
bin symbol indicates compliance and that the products must
be appropriately recycled or processed in accordance with
these directives. (RoHS) in electrical and electronic
equipment and the disposal of Waste.
Safety instructions
Please store this instruction manual for future reference.
Do not use this product near water or moisture. Clean only
with a dry cloth. Unplug this product from the wall outlet
before cleaning. Place the unit on a solid surface. Do not
block any ventilation openings. Do not put it in a closed
bookcase or a cabinet that may keep air from flowing
through its ventilation openings. Do not install near any heat
sources, such as radiators, heat registers, stoves or other
appliances that produce heat. Protect the power cord from
being walked on or pinched, particularly at plugs and the
point where they exit from the product. Servicing is required
when the product has been damaged. Do not attempt to
service this product yourself. Opening or removing covers
may expose you to dangerous voltages or other hazards.
Please contact the manufacturer to be referred to an
authorized service center near you. To prevent risk of fire or
electric shock, avoid over loading wall outlets, extension
cords, or integral convenience receptacles. Do not let
w w w . a r g o n a u d i o . c o m
objects or liquids enter the product. Use proper power
sources. Plug the product into a proper power source, as
described in the operation instructions or as marked on the
product.
Rear panel and connections
01
Volume adjustment
02
Cross-over / Frequency adjustment
03
Phase adjustment
04
Power switch
05
Fuse holder, if fuse needs to be replaced only use same
type and value.
IMPORTANT; remember to unplug the power cable from
mains socket before opening the fuse holder.
06
Power cable, the power cable should be pulled from
socket if not used for a longer period
07
Right/Left and +/- speaker cable from Subwoofer to
stereo satellite speakers
08
Right/Left and +/- speaker cable from Amplifier/Receiver
to Subwoofer
09
Auto on/off. If in "AUTO" position the Subwoofer will go
into stand-by after not playing for 10 min. If you leave it
in "ON" position the Subwoofer will remain powered on.
If it stays in "OFF" position, the subwoofer will remain in
standby.
10
Sound input from source or amplifier
See illustration on page 5 for explanation
B A S S 8
4