argon audio Radio 2 Швидкий старт - Сторінка 2

Переглянути онлайн або завантажити pdf Швидкий старт для Спікери argon audio Radio 2. argon audio Radio 2 2 сторінки.

Друкувати сторінку
Quick start
Start up
1.
Extend the Antenna
2.
Plug the Power supply into an electric outlet and
into the back of the Radio.
3.
The Radio will start searching for DAB stations
automatically. This may take a few minutes and
the progress will be shown in the display.
4.
Once finished searching, the Radio will start
playing the first found station.
Basic Operating
1.
Stations can be chosen by turning the
"Tuning/Select" knob.
2.
Once the prefer station is found press the
"Tuning/Select" knob and the chosen station will
start playing.
3.
To store a station on one of the 1-6 preset buttons,
press and hold the wished preset button for 3 sec.,
while playing the station that you want to store.
4.
When stored, the display will show "Preset X
saved"
5.
To change between the Modes DAB, FM, AUX
and Bluetooth (if your Radio has this function),
press the "Source" button repeatedly until you
reach the preferred Mode.
6.
To tune stations in FM Mode press and hold the
"Autotune" button for 3 sec. and the Radio will
scan to the next available station. You can store
FM stations like mentioned in point 3.
7.
Bluetooth (only If your product have Bluetooth
function). To pair and connect to a Bluetooth
Other Operating functions
Inactive standby
w w w . a r g o n a u d i o . c o m
R a d i o 1, 2 a n d 3 Q u i c k s t a r t
player device (Tablet, Laptop, Mobile Phone etc),
press the Bluetooth symbol button on the Radio
and the Radio will go into Bluetooth mode. Activate
Bluetooth on your Player device and let it scan for
Bluetooth devices. When the Argon Audio Radio is
found, paired and connect via your Player, you can
start play back immediately.
For more Bluetooth operating instructions, look in
the full User manual at www.argonaudio.com
The Radio is default set to turn off automatically
after 120 minutes To change this feature:
1.
Press and hold the Display button for 3-5 seconds
until the Menu appears.
2.
Then turn the Tuning/Select knob until it shows
"System" in the display and select this with a press
on the Tuning/Select knob.
3.
Turn the Tuning/Select knob until "Inactive
Standby" appears in the display then select this
by pressing the Tuning/Select knob.
4.
Then by turning the Tuning /Select knob - select "
Timeout: 2,4,5,6 hours or Off". Activate the
selected time by pressing the Tuning/Select knob.
5.
Exit the setup menu by repeatedly pressing the
Display button.
You can find a full User Manual in PDF format
for this product at; www.argonaudio.com