argon audio RADIO2 Посібник - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник для Радіо argon audio RADIO2. argon audio RADIO2 12 сторінок.

To do a manual scan

1. Press and hold the Display (5) button for three seconds until the text in the display

changes.

2. Turn the Tuning/select (3) button/knob until the display shows <Manual Tune>.

3. Press the Tuning/select (3) button/knob to activate manual tune.

4. To choose another frequency turn the Tuning/select (3) button/knob

5. Confirm by pressing the Tuning/select (3) button/knob.

3.2.2 Viewing additional Information (Display Information)

Display information containing useful ones such as; time, date, station name, signal strength,

program type, frequency, signal error, kbps quality, including radio services, song titles, and

special announcements sent by your DAB provider.

1. While playing a station in DAB mode, press the Display (5) button shortly. Additional

information appears at the bottom row of the display.

2. Each time you press Display (5) button, new Display information will appear.

There are nine different types of Display information available for DAB mode:

• Programs being played. Station information with text messages such as song title,

artiste name etc, can be displayed on some stations.

• Signal strength

• Station category

• Broadcast system/block

• Stations DAB+ broadcast frequency.

• Signal error

• Kbps quality and DAB reception type

• Time obtained automatically from a DAB transmission in your country or region.

• Date obtained automatically from a DAB transmission in your country or region.

3.2.3 Additional Menu functions in DAB mode

1. Pressing and holding the Display (5) button for 3 seconds, will bring you into the DAB

Menu.

2. In the Menu you will find these options, by turning/using the Tuning/select (3)

button/knob:

see point 3.2.1 page 5

see point 3.2.1 page 6 (top of this page)

<DRC> Dynamic range compression

This function reduces the difference between the loudest and quietest audio being broadcast.

Effectively, this makes quiet sounds comparatively louder and loud sounds comparatively

quieter.

Note: DRC only works if it is enabled by the broadcaster for a specific station.

There are three settings High, Low and Off.

1. Chose your preference by turning the Tuning/select (3) button/knob, confirm your choice

by pressing the Tuning/select (3) button/knob.

w w w . a r g o n a u d i o . c o m

R a d i o 2