argon audio Stream 3 MK2 Посібник - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник для Радіо argon audio Stream 3 MK2. argon audio Stream 3 MK2 16 сторінок.

6.1 Scanning for stations

The first time you select DAB radio mode, or if the station list is

empty, Stream 3 MK2 automatically performs a full scan to see what

stations are available. You may also need to start a scan manually

to update the list of stations for one of the following reasons:

•

Available stations change from time to time.

•

If reception was not good for the original scan

(for example the antenna was not up), this may result in

an empty or incomplete list of available stations.

•

If you have poor reception of some stations (burbling),

you may wish to list only stations with good signal strength.

To start a scan manually, select Menu > Scan.

Once the scan is complete, the radio shows a list of available stations.

To remove stations that are listed but unavailable, select Menu > Prune invalid.

To listen to or change a station, turn the Select control to view a list of stations and press to select. Once

selected, the station plays and the screen shows information about the station, track or show as broadcast.

To store a DAB preset, press and hold Preset until the display shows the Save preset screen. Select one of

the 10 presets to save the currently playing station.

To select a preset, press Preset briefly, then select one of the listed preset stations. When a preset station

is playing, it shows Pn (P1, P2 etc) in the bottom right of the screen.

While the stream is playing, the screen shows its name and DLS (Dynamic Label Segment) information

broadcast by the station giving real-time information such as programme name, track title and contact

details. Stereo broadcasts are indicated with an icon at the top of the screen. To view further information,

press Info .

Each time you press Info , another set of information is displayed, cycling through DLS text, programme

type, ensemble name/frequency, signal strength/error rate, bit rate/codec/channels and today's date.

Some DAB broadcasts offer dynamic range compression (DRC). This feature allows radios to compress the

dynamic range of the output audio stream, so that the volume of quiet sounds is increased, and the volume

of loud sounds is reduced. This can be useful if you are listening to music with a high dynamic range in a

noisy environment (for example, classical music while cooking).

To change the DRC of the Stream 3 MK2, select Menu > DRC, and then DRC high, DRC low or DRC off.

You can choose the order of the DAB station list to be either Alphanumeric, Ensemble or Valid. Ensemble lists

groups of stations that are broadcast together on the same ensemble, for example BBC or South Wales local.

Valid lists valid stations first, alphanumerically, then off-air stations.

To change station order, select Menu > Station order > then Alphanumeric, Ensemble or Valid.

w w w . a r g o n a u d i o . c o m

S t r e a m 3 M K 2