argon audio TT Посібник - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник для Вертушка argon audio TT. argon audio TT 9 сторінок.
Також для argon audio TT: Швидкий старт (2 сторінок)
Друкувати сторінку
- 1. Components, Features and Connections
- 2. Items Included in the Box
- 3. Turntable Platter and Belt Setup
- 4. Cartridge Downforce Adjustment
- 5. Connection to Amplifier/Speakers
- 6. Main Power Connection
- 7. Turntable Operation
- 8. Maintenance and Cleaning
- 9. Cartridge Replacement
- 10. Technical Specifications
- 11. Troubleshooting
- 12. The Platter Doesn’t Turn Although the Unit Is Switched on
- 13. No Signal through One or Other Channel or both Channels
- 14. Distorted of Inconsistent Sound from One or both Channels
T T M a n u a l
adaptor into your power outlet.
Operation
Turntable Operation
1. Connect the included power adapter to unit and press the power rocker switch to be "ON"
position.
2. Remove the needle cover from the cartridge.
3. Place the slipmat on the platter and place a record on the slipmat. If using 45 RPM records,
put the 45 RPM adapter on the center spindle before placing the record on the platter.
4. Set the 33/45 RPM Selector according to the type of record.
5. Turn the Start/Stop dial to the Start position to begin spinning the platter.
6. Unlock the arm clip and set the Lift Lever to the up position.
7. Position the tonearm over the desired location (groove) on the record.
8. Move the tonearm lift lever to the down position to move the tonearm toward the record.
Alternatively, place the needle over the desired location on the record.
9. Carefully lower the tonearm on the record.
10. When you are finished playing the record, raise the tonearm, return it to rest on the arm
clip, and turn the Start/Stop dial to the Stop.
Maintenance and Cleaning
Your turntable requires little to no regular maintenance. Remove dust with a slightly damp
antistatic cloth. Never use a dry cloth, this will create static electricity and attract more dust. It
is recommended to install the needle cover before cleaning or maintenance is carried out to
avoid damage. If the turntable is not used over a long period of time, the drive belt should be
removed to prevent unequal stretching.
NOTE: Always disconnect the record player from the power supply as a precaution before
maintenance!
4