Digitrax UT1 Посібник - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник для Блок управління Digitrax UT1. Digitrax UT1 11 сторінок. Traditional style loconet throttle

5.5 Dispatching Locomotives

Dispatching is a special feature incorporated into the LocoNet "lan-
guage" to meet the needs of clubs and serious operators that wish to
enforce a strict discipline in how engineers access locomotives. An
example would be having a Superintendent of motive power making
all the locomotive assignments. This also allows the UT1 to run 4
digit addresses and consists made up on other throttles in the system.
To dispatch a locomotive using a the UT1, simply press the "ACQ/DISP"
and the "SHIFT" buttons together and the locomotive or consist cur-
rently being controlled will be released to the system and also spe-
cially marked as a "Dispatched" locomotive as apposed to just
releasing it to the system.
This specially marked Dispatch locomotive can be requested and
acquired by any UT1 using the "99" address on the address selec-
tors.
Note: The same care should be taken when acquiring a "DIS-
PATCHED" locomotive as when selecting from scratch.
This specially marked Dispatch locomotive can also be requested and
acquired by any BT2 "Buddy Throttle." BT2s have no address
selection capability of their own.
The BT2 that acquires the dispatched locomotive/consist will pick-up the
train in exactly the state it was in when it was initially dispatched,
i.e., if the unit was moving with lights on, it will be acquired with no
speed change and continue with lights on until the acquiring BT2
commands a new setting.
The TOP or control locomotive in a consist or MU lash up can be
Dispatched to pass control of the entire consist .
There is only one Dispatch marked locomotive in the system at a
time. Any throttle can select this dispatched address since it is
"common" to all devices in the system. If another locomotive is
dispatched, it will replace the last locomotive in the dispatch slot.
14
UT1 Address Selection Flow Chart
15