AcueLighting Extreme 650 Hybrid Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Ді-джейське обладнання AcueLighting Extreme 650 Hybrid. AcueLighting Extreme 650 Hybrid 19 сторінок.

Друкувати сторінку

a safety cable to secure the fixture to the mounting surface as secondary precaution.

2. Mount the supplied hanging bracket to the base of the fixture body, inserts the fastener into

the locking holes of the base, and turn the handle of the fastener 1/4 turn clockwise to lock in

place. Inspect the bracket to make sure it is securely mounted to the fixture.

3. Install a safety cable that can withstand 10 times the weight of the equipment.

4. Before powering the fixture on make sure the locking mechanism has been disengaged.

Make sure there are no combustible materials in at least a 3-meter radius to where the fixture is

mounted.

Attention ！

Fixture must be secured with 2 clamps and a safety cable for safe operation.

7.3

FIXTURE CONNECTION

Attention

！

1. One product only can accept one input one output.

2. The data input protocol is DMX via the means of a 3 pin/ 5 pin XLR socket as follows.

Pin 1: + polarity signal

Pin2; - polarity signal

Pin3: Ground

3. DMX cable being used must be shielded twisted pair cable; standard loudspeaker cable

is not reliable to control the long-range data. 24AWG cable is suitable for more than

300-meter long-distance runs. Add DMX 512 signal amplifier where needed

8. AC POWER

8.1

VOLTAGE, POWER, FUSE SPECIFICATION

Input Voltage

110-240V

Fuse voltage

250V

8.2

POWER PROTECTION

Make sure to check if mains cables are not damaged and connectors are properly tightened before

connecting to fixture or mains. If cable is damaged you must replace it immediately.

Total Power

800W

Electronic current

10A

Frequency

50/60HZ

Specification

5×20