Cisco S170 Web Посібник із швидкого старту - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Мережеве обладнання Cisco S170 Web. Cisco S170 Web 25 сторінок. Web security appliance

Друкувати сторінку

Connect to the Appliance

Plug the Ethernet cables into the appropriate ports on the back

panel of the Cisco S170 appliance.

• The proxy ports are labeled P1 and P2.

P1 only enabled: When only P1 is enabled, connect it to

–

the network for both incoming and outgoing traffic.

P1 and P2 enabled: When both P1 and P2 are enabled,

–

you must connect P1 to the internal network and P2 to

the Internet.

• The traffic monitor ports are labeled T1 and T2.

Simplex tap: Ports T1 and T2; one cable for all packets

–

destined for the Internet (T1) and one cable for all

packets coming from the Internet (T2).

Duplex tap: Port T1; one cable for all incoming and

–

outgoing traffic.

Management PC

MGMT

CONSOLE

L4 Switch/

WCCP Router

Ethernet TAP

Simplex/Duplex