Cisco SG 100D-08 Посібник із швидкого старту - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Мережеве обладнання Cisco SG 100D-08. Cisco SG 100D-08 13 сторінок. Unmanaged gigabit switch with qos
Також для Cisco SG 100D-08: Посібник із швидкого старту (8 сторінок), Посібник із швидкого старту (13 сторінок)
Друкувати сторінку
To connect the unmanaged rackmount switch to the network:
Connect the Ethernet cable to the Ethernet port of a computer,
S
1
TEP
printer, network storage, or other network device.
Connect the other end of the network Ethernet cable to one of the
S
2
TEP
numbered unmanaged rackmount switch Ethernet ports.
The LED of the port lights if the device connected is active.
If the uplink from one unmanaged, cascaded switch to another is
N
OTE
moved from one port to another port, it can take up to five
minutes for full network operation to resume. This is normal and
expected behavior.
Repeat
S
3
TEP
the unmanaged rackmount switch.
To prioritize voice or video traffic by using the QoS feature on the
N
OTE
switch, set flow control to off in the configurations of the
connected devices. Otherwise, flow control might send a pause
frame to the switch, blocking the high-priority QoS packets
queued on the port. On some devices, such as some IP phones
and IP cameras, flow control might not be configurable.
Connect the power cord to the switch and a power source.
S
4
TEP
5
Step 1
and
Step 2
for each device you want to connect to
Cisco Unmanaged Rackmount Switches