Cisco SPA525G - Small Business Pro IP Phone VoIP Посібник із швидкого старту - Сторінка 8

Redialling

Depending on your phone model and phone system set-up, use one of the following methods:

•

Press 'Redial' to dial the last number that you called.

•

To redial a recently called number, press 'Redial', select the number from the list and then press

'Dial' (available on some phone systems).

•

Press the 'Setup' button and then select 'Call History'. You can then select any list, such as missed

calls or received calls and you can press 'Dial' to call any number on the list.

Adjusting call volume and muting

To adjust the volume while you are on a call, press '+' on the volume button to increase the volume, or

press '-' to decrease the volume. Press 'Save'.

Pressing the volume button while not on a call adjusts the volume of the phone's ringer.

To mute the phone microphone, speaker, or headset microphone, press the 'Mute' button on the phone.

The button lights red. Press the 'Mute' button again to unmute.

Use the Do Not Disturb feature to prevent incoming calls from ringing your phone. If you have voicemail

configured, incoming callers immediately reach voicemail. If voicemail is not configured, callers hear a

busy signal or message.

To set Do Not Disturb, press the 'DND/DnD' soft key on your phone. Depending on your phone system,

either press the 'Clr DND' soft key or the 'DnD' soft key to turn Do Not Disturb off.

To access voicemail, press the 'Messages' button on your phone. Your system administrator should

configure your phone with the correct voicemail number so that pressing the 'Messages' button

automatically dials your voicemail system.

0800 040 8888

v1 - 06/13

working with daisy