Epson 3590 - Perfection Photo Посібник користувача - Сторінка 7

If an error occurs, the scanner stops operating and the scanner

light flashes red. This indicates one of the following problems:

❏ The scanner is not connected to your computer properly or

your software is not fully installed. See the Start Here sheet

that came with your scanner for instructions on installing

the scanner software and connecting the scanner to your

computer.

❏ The scanner transportation lock is locked. Slide the lock to

the unlock position.

After trying these solutions, turn off the scanner by unplugging

its power cord, then plug it in to turn it back on. If the scanner

light is still flashing:

❏ The scanner may be malfunctioning.

❏ The scanner lamp may need to be replaced.

❏ The connected optional equipment may be malfunctioning.

Before transporting the scanner for a long distance or storing it

for an extended period of time, you need to lock the scanner's

carriage to prevent damage.

1. Plug in the scanner, connect it to your computer, and wait

until the carriage moves to the home position (position

nearest the buttons). While the

unplug the scanner.

2. If the cover cable is attached,

disconnect it.

3. To lock the transportation lock, lift

the scanner and slide the lock to the

locked position. This secures the

carriage.

Caution: Do not turn the scanner over; this may damage it.

4. Attach the protective materials and repack the scanner in its

original box.

Start light is green,

]

Related Documentation