Epson ActionLaser 1500 Бюлетень підтримки продукту

Переглянути онлайн або завантажити pdf Бюлетень підтримки продукту для Сканер Epson ActionLaser 1500. Epson ActionLaser 1500 8 сторінок. Imaging cartridge replacement procedure
Також для Epson ActionLaser 1500: Папір та доставка паперу (11 сторінок), Посібник з налаштування (18 сторінок), Посібник з монтажу (7 сторінок), Специфікація продукту (1 сторінок)

EPSON AMERICA INC.

Product Support Bulletin

Subject: New ActionLaser 1000/1500 Imaging Cartridge Replacement Procedure

Date: 6/4/93

Page(s): 1 of 2

This bulletin provides supplemental information to resolve a situation when printed

images become faint, SelecType Level 2 TONER message indicating that the

toner amount is low (E*

After the instructions to replace the imaging cartridge (as shown on pages 3-29

through 3-32 of the ActionLaser 1000/1500 Reference Guide) has been followed,

some printers may continue to display the above messages.

not affect printer operation or print quality in any way.

resetting the printer as described below:

NOTE:

Resetting clears all the saved SelecType information but the status

sheet printed in step 3 shows the current settings.

1. Press the LEVEL 1 button to enter SelecType Level 1.

2. Press CONTINUE (v) button until STATUS SHEET appears on the display.

3. Press INITIALIZE / RESET (b) button twice to print a status sheet.

4. Save the status sheet for future reference, then turn off the printer.

5. Press and hold down the ON LINE, CONTINUE (v), and FEED (b) buttons

while you turn on the printer and keep pressing the buttons until the following

message appears:

When the above message appears, release the buttons.

F), and three messages flash in rotation on the LCD:

NEW CARTRIDGE?

YES, PRESS RESET

NO, PRESS CONTINUE.

STARTUP ERROR LT<>A4

PSB No: P-0100

Originator: LHT

This condition does

It can be corrected by

EPSON