Cisco C220 Налаштування - Сторінка 3

Переглянути онлайн або завантажити pdf Налаштування для Сервер Cisco C220. Cisco C220 10 сторінок.

Server Setup

Note

For releases 1.0-1.2 a reboot may be needed if an interface was not plugged in at boot time. This is a pre-1.3

issue, except for any interface requiring an SFP, which will still needs to be plugged in at boot time post 1.3.

The network cable plugged into the SFP may be safely hot-plugged.

C220 M4 Rack Server Setup

The interfaces must be properly connected and configured for the appliance to operate.

Use port 3 Slot 2 for the (optional) Clust interface.

Note

The details for your appliance may differ from the illustrations. Contact [email protected] if you

have any questions.

Figure 3: Cisco UCS C220 M4 SFF Rack Server

All manuals and user guides at all-guides.com

C220 M4 Rack Server Setup

Server Setup