Cisco C480M5 Посібник з встановлення - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з встановлення для Сервер Cisco C480M5. Cisco C480M5 19 сторінок.

Installing the Server in a Rack

Figure 2: Attaching the Inner Rail to the Side of the Server

Left side of chassis

Right side of chassis

Step 3

Install the slide rail assemblies into the rack:

Note

The slide rail assemblies are not identical; there is a left rail and a right rail (as viewed from the rack front).

The assemblies are marked with "L" for left or "R" for right.

a) Align the front end of the left-side slide-rail assembly (marked "L") with the left-front rack-post (as you face the

front of the rack).

The slide rail front-end wraps around the outside of the rack post and the mounting pegs enter the rack-post holes

from the outside-front.

The bottom of the slide rail assembly lines up with the intended bottom of the rack unit.

b) Push the front mounting pegs into the rack-post holes until you hear them click and lock.

c) Adjust the slide-rail length until it reaches the rear rack post perfectly level.

Note

Ensure that the rail is perfectly level and that the same height rack-post holes are used in the front and rear

posts.

d) Hold open the rear-peg spring latch, then push the rear mounting pegs into the rear rack-post-holes

The rear mounting pegs enter the rear rack-post holes from the inside of the rack post.

e) Release the rear-peg spring latch to lock the rear pegs in place.

f) Attach the second slide-rail assembly to the opposite side of the rack. Ensure that the two slide-rail assemblies are at

the same height and are level front-to-back.

Ensure that all pegs are fully inserted into the rack post holes before installing the server to the rack.

Caution

Installing the Server

Right-side inner rail marked "R"

Installing the Server