Cisco Firepower 1120 Посібник з встановлення обладнання - Сторінка 22

Переглянути онлайн або завантажити pdf Посібник з встановлення обладнання для Сервер Cisco Firepower 1120. Cisco Firepower 1120 30 сторінок. Connected grid router
Також для Cisco Firepower 1120: Посібник з монтажу (6 сторінок), Посібник із швидкого старту (10 сторінок), Посібник (6 сторінок), Посібник з встановлення обладнання (42 сторінок), Посібник з розгортання (8 сторінок), Початок роботи (42 сторінок), Посібник з встановлення обладнання (42 сторінок)

Cisco Firepower 1120 Посібник з встановлення обладнання
Rack-Mount the Chassis
Step 1
Attach both brackets to the sides of the chassis, either to the front or rear.
After the brackets are secured to the chassis, you can mount it in the rack.
Step 2
Attach the chassis to the rack.
We recommend that you install the chassis with the rear panel facing the cold aisle. (See the following illustration for an
example of air flow from back to front.)
Figure 7: Chassis Installed in the Rack
1
Left rack-mount bracket
Cold aisle (chassis rear panel)
3
Air flow direction
5
Cisco Firepower 1100 Series Hardware Installation Guide
18
2
Right rack-mount bracket
Hot aisle (chassi front panel)
4
Mount the Chassis