Cisco Firepower 2100 Series Посібник з розгортання
Переглянути онлайн або завантажити pdf Посібник з розгортання для Сервер Cisco Firepower 2100 Series. Cisco Firepower 2100 Series 8 сторінок. Rack-mount and ground the chassis
Також для Cisco Firepower 2100 Series: Посібник (12 сторінок)
Друкувати сторінку
Firepower Easy Deployment Guide for Cisco
Firepower 1000 or 2100 Firewalls
First Published: 2020-10-28
Last Modified: 2021-05-18
Firepower Easy Deployment Guide for Cisco Firepower 1000 or 2100
Firewalls
This document provides information about two easy deployment options for customers of Firepower Threat
Defense (FTD) version 6.7 and later: Low-Touch Provisioning for Cisco Defense Orchestrator (CDO) customers
and Remote Branch Office Deployment for Firepower Management Center (FMC) customers.
• See
• See
Low-Touch Provisioning Using CDO
Low-touch provisioning allows anybody to connect a new Firepower 1000 or 2100 series device to their
network so that their IT department can onboard the device to CDO and configure it remotely.
What do you want to do?
•
•
Connect a New Cisco Firepower Firewall to Your Network
This topic describes the process of connecting your Firepower firewall to your network so that it can be
managed remotely by a CDO administrator.
If you received a Firepower firewall at your branch office and your job is to plug it in to your network,
watch this video.
The video describes your firewall and the LED sequences on the device that indicate the device's status. If
you need to, you'll be able to confirm the device's status with your IT department just by looking at the LEDs.
These are the steps described in the video:
1. Your Firepower firewall needs to be one of a certain model number and needs to have FTD version 6.7
installed on it for low-touch provisioning to work. The table below shows the Firepower models that
support low-touch provisioning.
Low-Touch Provisioning Using CDO, on page 1
to your network or to manage that new firewall with CDO.
Remote Branch Office Deployment of FTD Devices for Management by an FMC, on page 7
you are an FMC administrator and want to manage an FTD at a remote branch using FMC.
Connect a New Cisco Firepower Firewall to Your
Onboard a Firepower Firewall to CDO Using its Serial
Firepower Easy Deployment Guide for Cisco Firepower 1000 or 2100 Firewalls
if your job is to connect a new Firepower firewall
Network. I work at the branch office.
Number. I am the CDO administrator.
if
1