Cisco Nexus 7000 Series Посилання - Сторінка 27

Друкувати сторінку

Cisco Nexus 7000 Series NX-OS High Availability Commands

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m

system cores

To configure the destination for the core dumps on your system, use the system cores command. To

revert to the default, use the no form of this command.

Syntax Description

slot1

path

tftp

server

filename

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin

network-operator

vdc-admin

vdc-operator

Command History

Release

4.0(1)

Usage Guidelines

This command does not require a license.

Examples

This example shows how to configure the destination for the system core:

switch# config t

switch(config)# system cores slot1:core_file

switch(config)#

This example shows how to disable system core logging:

switch# config t

switch(config)# no system cores

OL-23374-01

system cores {slot1:[path] | tftp:/server//[path/]}filename

no system cores {slot1:[path] | tftp:/server//[path/]}filename

Specifies the slot0: external file system.

(Optional) Directory path to the file. The directory names in the path are case

sensitive.

Specifies a TFTP server.

Name or IPv4 address of the TFTP server. The server name is case sensitive.

Name for the core file. The name is alphanumeric, case sensitive, and has a

maximum of 32 characters.

Modification

This command was introduced.

Cisco Nexus 7000 Series NX-OS High Availability Command Reference, Release 5.x

system cores

HACR-17