B2 Audio M1u Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач B2 Audio M1u. B2 Audio M1u 10 сторінок. B2 audio class d mono amplifier
Також для B2 Audio M1u: Посібник користувача (9 сторінок)
Друкувати сторінку
2. Panel layout
M1u
INPUT
Signal input from the head unit. A minimum level
input of 0.2V is essential for correct operation.
POWER & PROTECTION INDICATOR
Power LED, Blue-lit shows correct operation.
Protect LED, Red-lit shows general malfunction,
faulty connection or thermal protection.
GAIN (6V ~ 0.2V)
Matching of the output voltage from the head unit's
RCA line-outs to the input section.
SUBSONIC FILTER (10Hz ~ 50Hz @ 24dB/Oct)
Adjusts the subsonic cut off point to eliminate
frequencies within the filter's range.
SPEAKER OUTPUTS
Amplifier connection to the loudspeakers.
Minimum speaker cable is 12 gauge.
Minimum impedance for the
used as a single unit.
In a daisy chain configuration the minimum
impedance is 2
.
M1u
is 1
if
SWEET LIKE DANISH
BASS BOOST
Variable bass boost with 0-9dB @ 45Hz.
LOW PASS FILTER (35Hz ~ 250Hz @ 24dB/Oct)
Adjusts the cut off point for the low pass filter
within the filter's range.
PHASE CONTROL
Variable phase adjustment from 0-180 degrees.
REMOTE LEVEL CONTROL PORT
Connection of external level control.
(The
Better Bass Remote
can be connected for additional features).
OUTPUT MASTER / INPUT SLAVE
For daisy chain connection of 2 M1u amplifiers.
Minimum impedance is 2
.
4
.