Cisco SNS 3515 Посібник з монтажу - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник з монтажу для Сервер Cisco SNS 3515. Cisco SNS 3515 36 сторінок.

Unpack and Inspect the Server

Warning

Warning: The plug-socket combination must be accessible at all times, because it serves as the main

disconnecting device.

Statement 1019

Warning

This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the

protective device is rated not greater than: 250 V, 15 A.

Statement 1005

Warning

Installation of the equipment must comply with local and national electrical codes.

Statement 1074

When you are installing a server, use the following guidelines:

• Plan your site configuration and prepare the site before installing the server. See the

• Ensure that there is adequate space around the server to allow for servicing the server and for adequate

• Ensure that the air-conditioning meets the thermal requirements listed in the

• Ensure that the cabinet or rack meets the requirements listed in the

• Ensure that the site power meets the power requirements listed in the

Caution

Avoid UPS types that use ferroresonant technology. These UPS types can become unstable with systems such

as the Cisco UCS, which can have substantial current draw fluctuations from fluctuating data traffic patterns.

Unpack and Inspect the Server

Caution

When handling internal server components, wear an ESD strap and handle modules by the carrier edges only.

Note

Keep the shipping container in case the server requires shipping in the future.

Cisco Secure Network Server 3500 Series Appliance Hardware Installation Guide

Preparation Guide

for the recommended site planning tasks.

airflow. The airflow in this server is from front to back.

page

13.

If available, you can use an uninterruptible power supply (UPS) to protect against power failures.

Before You Begin

Cisco UCS Site

Server Specifications, on

Rack Requirements, on page

Power Specifications, on page

12.

14.