Cisco TelePresence Посібник

Переглянути онлайн або завантажити pdf Посібник для Сервер Cisco TelePresence. Cisco TelePresence 24 сторінки. Configuring a cisco unified communications manager sip trunk with a cisco telepresence content server
Також для Cisco TelePresence: Брошура (4 сторінок), Технічні характеристики (7 сторінок), Посібник з монтажу (4 сторінок), Посібник адміністратора (27 сторінок), Короткий довідник (2 сторінок), Інструкція з монтажу (2 сторінок)

Друкувати сторінку
Cisco TelePresence Посібник
Configuring a Cisco Unified Communications
Manager SIP Trunk with a Cisco
TelePresence Content Server
This document includes instructions for configuring a Cisco Unified Communications Manager version
9.1.2 and 10.5 Session Initiation Protocol (SIP) trunk with Cisco TelePresence Content Server (Content
Server) Release 6.2.
Before integrating Cisco Content Server 6.2 with CUCM through a SIP trunk, confirm that the Cisco
Content Server is ready for the integration completing the applicable tasks in the Content Server
installation guide. See the
http://www.cisco.com/c/en/us/td/docs/telepresence/tcs/6_0/installation/guide/tcs-vm-install.html
CUCM Integration with Content Server 6.2
After installing the CUCM software is installed, complete these procedures in the following order:
•
•
Cisco Content Server Standalone
To create a SIP Trunk between CUCM and Content Server.
1.
2.
3.
Complete these steps in the order given:
Create the SIP Trunk Security Profile
Step 1
Login to the Cisco Unified Communication Manager Administration Interface.
Step 2
Choose Security > SIP Trunk Security Profile.
Step 3
On the Find and List SIP Trunk Security Profiles page, click Add New.
CUCM Integration with Cisco Content Server Standalone
Cisco TCS 6.2 with a Content Server cluster configured
Create the SIP Trunk Security Profile
To Create the SIP Profile
Create the SIP Trunk
Cisco TelePresence Content Server Release 6.2.1 Administration and User Guide
3
C H A P T E R
3-15