Acuity 247 Series Інструкція з монтажу

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Ліхтар Acuity 247 Series. Acuity 247 Series 2 сторінки. Post top luminaire & full cutoff

POST TOP LUMINAIRE 247 SERIES & TCL FULL CUTOFF (FC)
DISCONNECT POWER BEFORE RELAMPING OR WIRING THE FIXTURE.
HOUSING MUST BE GROUNDED TO REDUCE POTENTIAL OF ELECTRICAL SHOCK
READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION
RISK OF FIRE. PRODUCT FOR OUTDOOR INSTALLATION AND USE ONLY.
TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURE MUST BE INSTALLED IN COMPLIANCE WITH ALL
APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. FOR CODE INTERPRETATION,
CUPOLA LENS
CUPOLA LENS
ADJUST PHOTO-
ADJUST PHOTO-
CONTROL BY LIFTING
CONTROL BY LIFTING
& TURNING CUPOLA
& TURNING CUPOLA
SIMULTANEOUSLY
SIMULTANEOUSLY
HOOD
HOOD
TRIGGER
TRIGGER
LATCH
LATCH
-OPTIONAL-
-OPTIONAL-
NEMA
NEMA
LABEL HERE
LABEL HERE
-OPTIONAL-
-OPTIONAL-
LADDER REST (2)
LADDER REST (2)
-OPTIONAL-
-OPTIONAL-
SET SCREWS (3)
SET SCREWS (3)
FIGURE 1
FIGURE 1
CLOSED HOOD - STREE
CLOSED HOOD - STREET T SIDE VIEW
FIGURE 2
FIGURE 2
OPEN HOOD - TOP VIEW
OPEN HOOD - TOP VIEW
DRAWING NO. A72084 REV -- (FRONT)
American Electric Lighting a division of Acuity Lighting Group, Inc. Granville, OH
INSTALLATION INSTRUCTIONS
WARNING
!
WARNING
!
CAUTION
!
CONSULT LOCAL CODE AUTHORITY
CUPOLA CAP
CUPOLA CAP
CUPOLA BASE
CUPOLA BASE
LAMP SOCKET
LAMP SOCKET
LOCATED WITHIN
LOCATED WITHIN
HOOD
HOOD
CLOSURE
CLOSURE
SCREW
SCREW
BOSS
BOSS
COVER
COVER
LOWER HOUSING
LOWER HOUSING
MIN POLE OD 2.375"
MIN POLE OD 2.375"
MAX POLE OD 3"
MAX POLE OD 3"
SIDE VIEW
LOWER
LOWER
HOUSING
HOUSING
COVER
COVER
CAPTIVE
CAPTIVE
SCREW FOR
SCREW FOR
COVER
COVER
©2008 ACUITY LIGHTING GROUP, INC.
OPENING & CLOSING THE HOOD:
OPENING & CLOSING THE HOOD:
1 1 . . TO OPEN THE FIXTURE HOOD, LOCATE THE CLOSURE SCREW
TO OPEN THE FIXTURE HOOD, LOCATE THE CLOSURE SCREW
LOCATED ON THE STREET SIDE OF THE FIXTURE. (SEE
LOCATED ON THE STREET SIDE OF THE FIXTURE. (SEE
FIGURE 1.)
FIGURE 1.)
2. UNSCREW THE CAPTIVE CLOSURE SCREW. YOU WILL
2. UNSCREW THE CAPTIVE CLOSURE SCREW. YOU WILL
KNOW
KNOW T THE SCREW
HE SCREW IS IS COMPLETELY DISENGAGED FROM
COMPLETELY DISENGAGED FROM
THE HOOD WHEN
THE HOOD
WHEN THE SCREW CAN MOVE FREELY UP AND
THE SCREW CAN MOVE FREELY UP AND
DOWN.
DOWN.
3. OPEN THE HOOD.
3. OPEN THE HOOD.
4. TO CLOSE THE FIXTURE, SIMPLY CLOSE THE HOOD AND RE-
4. TO CLOSE THE FIXTURE, SIMPLY CLOSE THE
TIGHTEN THE CAPTIVE CLOSURE SCREW.
TIGHTEN THE CAPTIVE CLOSURE SCREW.
NOTE FOR OPTIONAL TRIGGER LATCH: TO OPEN THE UNIT
NOTE FOR OPTIONAL
TRIGGER LATCH: TO OPEN THE UNIT
SIMPLY PULL TRIGGER SIMULTANEOUSLY WITH YOU
SIMPLY PULL
TRIGGER SIMULTANEOUSLY WITH YOUR R INDEX
FINGER WHILE
FINGER WHILE PUSHING UP ON THE HOOD WITH YOUR
PUSHING UP ON THE HOOD WITH YOUR THUMBS.
CLOSE THE UNIT BY
CLOSE THE UNIT BY CLOSING THE HOOD AND PRESSING
CLOSING THE HOOD AND PRESSING DOWN
UNTIL THE TRIGGER LATCH ENGAGE.
UNTIL THE TRIGGER LATCH ENGAGE.
FULL CUTOFF COVER REMOVAL & INSTALLATION:
FULL CUTOFF COVER REMOVAL & INSTALLATION:
1. UNSCREW THE CAPTIVE SCREW LOCATED ON TOP OF THE
1. UNSCREW THE CAPTIVE SCREW LOCATED ON TOP OF THE
COVER.
COVER.
2. REMOVE COVER AND DISCONNECT MOLEX CONNECTIONS.
2. REMOVE COVER AND DISCONNECT MOLEX CONNECTIONS.
NOTE: CHECK TO INSURE THAT THE WIRES ARE NOT PINCHED
NOTE: CHECK TO INSURE THAT THE WIRES ARE NOT PINCHED
AGAINST THE CASTING DURING RE-INSTALLATION OF THE
AGAINST THE CASTING DURING RE-INSTALLATION OF THE
COVER.
COVER.
HOOD AND RE-
INDEX
THUMBS.
DOWN
PART NUMBER 057-71-72084