finder BLISS WI-FI CHRONOTHERMOSTAT 1C.91 Посібник - Сторінка 18
Переглянути онлайн або завантажити pdf Посібник для Терморегулятор finder BLISS WI-FI CHRONOTHERMOSTAT 1C.91. finder BLISS WI-FI CHRONOTHERMOSTAT 1C.91 20 сторінок.
Друкувати сторінку
CHRONOTHERMOSTAT Wi-Fi CONNECTION TO THE NETWORK
After connecting the timer-thermostat to the home network, the update
will take place within 4 to 40 minutes, depending on the update time set
on the application.
To immediately connect the chronothermostat to the App, with display
off, press the Finder button for 3 seconds. Segments will appear to indicate
waiting for parameters to be synchronized with the APP.
Update in progress
3"
Updated
If the wait for synchronization persists for too long it means that the
chronothermostat has difficulty updating with the cloud (via the APP).
The problem may be due either to the poor network signal (seen by the
Chronothermostat) or to a slow home connection, busy broadband or
slow server response. Battery life depends greatly on connection times.
After 20 seconds, if the connection has not occurred, an error message
appears (see page 18). If there was a previous connection to the Cloud
the chronothermostat will display the last setting received from the server.
16