Cisco UCS B420 M4 Вказівки щодо встановлення та обслуговування - Сторінка 6
Переглянути онлайн або завантажити pdf Вказівки щодо встановлення та обслуговування для Сервер Cisco UCS B420 M4. Cisco UCS B420 M4 38 сторінок. Blade server
Друкувати сторінку
Local Console Connection
at a later time. To safely reboot a server from a power-down state, use the Boot Server action in Cisco UCS
Manager.
Local Console Connection
The local console connector allows a direct connection to a blade server to allow operating system installation
and other management tasks to be done directly rather than remotely. The port uses the KVM dongle cable
that provides a connection into a Cisco UCS blade server; it has a DB9 serial connector, a VGA connector
for a monitor, and dual USB ports for a keyboard and mouse. With this cable, you can create a direct connection
to the operating system and the BIOS running on a blade server. A KVM cable ships standard with each blade
chassis accessory kit.
Figure 2: KVM Cable for Blade Servers
1
3
Secure Digital Cards
Secure Digital (SD) card slots are provided and one or two SD cards can be populated. If two SD cards are
populated, they can be used in a mirrored mode.
Note
Do not mix different capacity cards in the same server.
Cisco UCS B420 M4 Blade Server Installation and Service Note
4
Connector to blade server
2
local console connection
VGA connector for a
4
monitor
Overview
DB9 serial connector
2-port USB connector for
a mouse and keyboard