Cisco UCS C200 Налаштування - Сторінка 5

Переглянути онлайн або завантажити pdf Налаштування для Сервер Cisco UCS C200. Cisco UCS C200 10 сторінок.

Power Up the KVM

Complete these steps in order to power up the server:

Plug the power cord into the chassis.

Note:

♦

CIMC initializes system standby (Power Off mode).

♦

CIMC is active and can be controlled through GUI or CLI, if you know the IP address.

Depress Front Panel Power:

♦

The Fans begins to spin up.

♦

Then POST sequence begins.

♦

At this point you can either boot up or begin the installation process.

♦

Note that for large memory, models can display a blank screen for several minutes.

♦

For C−250If you immediately depress the power switch, you interrupt the CIMC

initialization.