Epson GT-30000 Series Інформація про продукт - Сторінка 6

Друкувати сторінку

EPSON GT-30000

If you are scanning multiple pages using the ADF, you do

not need to Preview the document unless you want to

scan only a portion of a document.

Preview button

Marquee button

Auto Locate

button

Auto Exposure

button

5. Choose your scan settings.

Click the

Auto Locate

the scan area around the edges of your image. You can

also adjust the scan area by positioning the mouse pointer

over the dotted line around the marquee's edge and

dragging the box to resize the marquee.

Click the

Auto Exposure

the highlight and shadow exposures.

Generally it's a good idea to use the Auto Exposure button to

obtain the best settings for your scan. See your electronic

EPSON GT-30000 Reference Guide for more information

about choosing settings.

If you need to remove color cast from your image, use the

Gray Balance Intensity feature.

6. When you've finished making adjustments, click the

button.

The

light on the front of the scanner flashes while

READY

it's scanning. In a few moments, a scanned image is

imported into your host application's window.

(If the

light continues to blink, it may indicate an

READY

error condition. See page 4 for more information.)

7. Click

to close the EPSON TWAIN HS or EPSON

TWAIN HS Network window and return to your

application.

8. If you want, save your image using the

options from the

menu of your host application.

File

6 - EPSON GT-30000

button to automatically define

button to automatically set

Save

Save As

Using a Network Scanner

Network scanning involves the following steps:

Two or more computers must be connected on the same

network segment running TCP/IP protocol.

The scanner server must be turned on and running

EPSON Scan Server.

From the client computer, start EPSON TWAIN HS

Network to establish a connection to the scanner server.

Only one client computer at a time can connect to the

scanner server. (See "Starting EPSON TWAIN HS

Network" on page 7 for instructions.)

Choose your settings, and then place your document on

the scanner or in the automatic document feeder.

Start the scan. Although this can be done from EPSON

TWAIN HS Network on the client computer, it may be

more convenient to press the scanner's

to start the scan from the scanner server. A progress meter

appears on both the scanner server and client computer as

the image is pre-scanned, then scanned.

If you want to scan more than one image, place your

second image on the document table and press the

scanner's Start button again. Repeat this step for every

image you want to scan. (The settings you chose for the

first image apply to these images too.)

The Start button is only available when you use EPSON

TWAIN HS to access a scanner connected to your computer and

you are running Windows Me, Windows 2000, or Windows 98.

If you are running Windows 95 or Windows NT, the Start

button is disabled.

When you return to the client computer, your scanned

images appear in the host application's window. Close

EPSON TWAIN HS Network to end your connection to

the scanner server and allow other client computers to use

the scanner.

Scan

When you press the Start button, some applications

automatically close the client computer's connection to the

scanner server when the scan is finished. You can't use the

Start button to scan multiple images if you're using these

applications.

3/01

Start button or