Cisco 2800 Series Огляд - Сторінка 17

Переглянути онлайн або завантажити pdf Огляд для Шлюз Cisco 2800 Series. Cisco 2800 Series 27 сторінок. Cisco ios software configuration
Також для Cisco 2800 Series: Посібник із швидкого старту (13 сторінок), Технічний паспорт (8 сторінок), Посібник із швидкого старту (47 сторінок), Примітка до заявки (41 сторінок), Посібник із швидкого старту (45 сторінок), Конфігурація (10 сторінок), Технічний паспорт (5 сторінок), Технічний паспорт (20 сторінок), Налаштування (32 сторінок)

Друкувати сторінку

1. Specifications

Table 7

Slot Number

Onboard ports

1. A VWIC in slots 1, 2, and 3 can operate in both data and voice mode; in slot 0, a VWIC can operate only in voice

On the Cisco 2801 router, the numbering format for configuring an asynchronous interface is 0/slot/port.

Note

To configure the line associated with an asynchronous interface, simply use the interface number to

specify the async line. For example, line 0/1/0 specifies the line associated with interface serial 0/1/0 on

a WIC-2A/S in slot 1. Similarly, line 0/2/1 specifies the line associated with interface async 0/2/1 on a

WIC-2AM in slot 2.

Table 8

Interface Numbering on Cisco 2811, Cisco 2821, and Cisco 2851 Integrated Services Routers

Port Location

Built into the chassis front panel Interface-type port

Built into the chassis rear panel

In an interface card (HWIC,

HWIC-D, WIC, VWIC, VIC)

plugged directly into an HWIC

slot in a chassis

In an interface card (WIC,

VWIC, VIC) plugged into a slot

in a network module

Built into a network module

(NME, NME-X, NMD,

NME-XD)

FXS or FXO port in an extension

voice module (EVM)

OL-5783-01

Interface Numbering on Cisco 2801 Series Routers

Slot Type

Fast Ethernet

VIC / VWIC (voice only)

HWIC / WIC / VIC / VWIC

WIC / VIC / VWIC

HWIC / WIC / VIC / VWIC

mode.

Interface Numbering Scheme

Interface-type 0 / port

Interface-type 0 / interface-card-slot

Interface card slots built into the chassis are labeled

Note

HWIC slot-number on Cisco 2800 series routers .

Interface-type 1

Interface-type 2

FXS/DID port numbers 0 to 7 are built into the EVM.

FXS/FXO port numbers 8 to 15 are in expansion module 0.

FXS/FXO port numbers 16 to 23 are in expansion module 1.

Interface Numbering Range

0/0 and 0/1

0/0/0 to 0/0/3

0/1/0 to 0/1/3 (single-wide HWIC)

0/1/0 to 0/1/7 (double-wide HWIC)

0/2/0 to 0/2/3

0/3/0 to 0/3/3 (single-wide HWIC)

0/3/0 to 0/3/7 (double-wide HWIC)

/ port

/ interface-card-slot / port

/ port

/ 0

/ port

Interface Numbering

Examples

usb 0

usb 1

interface fa 0/x

interface gi 0/x

interface serial 0/x/y

interface async 0/x/y

line 0/x/y

interface fa 0/x/y

voice-port 0/x/y

controller t1 1/x/y

voice-port 1/x/y

interface serial 1/x/y

interface async 1/x/y

line 1/x/y

interface gi 1/x

interface serial 1/x

interface async 1/x

line 1/x

voice-port 2/0/x

Overview of Cisco 2800 Series Routers

1, 2