Digitus DN-16062 Посібник з монтажу - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з монтажу для Камера спостереження Digitus DN-16062. Digitus DN-16062 17 сторінок. Hd network

2. INSTALLATION & CONNECTION

1. Find the bracket and its accessories supplied with the camera.

2. Attached the base of the bracket (the round one) to where you want to install this camera,

and fasten it with the supplied screws.

3. Assemble the bracket as illustrated below, and adjust the angle of the camera.

Connect the supplied power adapter to the camera's power jack (DC 5V) on the

rear panel and the power outlet.

Before using this network camera, please follow the instructions below to finish the network

connection settings based on your installation environment:

 To configure the network settings, you must connect the camera to your PC by LAN. For

details, please refer to "3.1 Network connection via LAN" at page 6.

 To configure the network settings via a web browser, please refer to "Fehler! Verweisquelle

konnte nicht gefunden werden." at page Fehler! Textmarke nicht definiert..

Step1:

Connect this network camera and your PC via a RJ45 network cable, and make sure the

camera is powered on.

Step2:

Set the PC's IP address as "192.168.1.XXX" (1~255, except 10).