Digitus DN-16082-1 Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Камера спостереження Digitus DN-16082-1. Digitus DN-16082-1 17 сторінок. 4mp wdr rugged dome ip camera
Друкувати сторінку
1.4
Connectors
The diagram below shows the default button and various connectors of the
camera. Definition for each connector is given as follows.
No.
1
RJ-45
2
BNC*
Power
3
(DC 12V / AC 24V)
4
RS-485
5
Default Button
6
Alarm & Audio I/O
7
SD Card Slot
*Please contact the manufacturer for the compatible BNC cable.
Connector
NOTE: It is not recommended to record with the SD card for 24/7
continuously, as it may not be able to support long term continuous data
read/write. Please contact the manufacturer of the SD card for
information regarding the reliability and life expectancy.
Pin
Definition
-
For network and PoE connections
1
BNC
2
GND
1
DC 12V
AC 24V 1
2
GND
AC 24V 2
1
D-
2
D+
3
GND
Press the reboot button with a proper tool for at
-
least 20 seconds to reboot the camera.
1
Audio In L
2
Audio In R
3
GND
4
Audio Out L
5
Audio Out R
6
Alarm Out +
Alarm Out −
7
8
Alarm In +
Alarm In −
9
Insert the SD card into the card slot to store videos
-
and snapshots. Do not remove the SD card when
the camera is powered on.
Remarks
For analog video output
Power connection
RS-485 connection
Audio In
Audio Out
Alarm connection
5