Digitus DN-80110 Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Мережевий маршрутизатор Digitus DN-80110. Digitus DN-80110 9 сторінок. 16/24 port
desktop & rack-mountable
gigabit ethernet switch
Також для Digitus DN-80110: Посібник користувача (8 сторінок)
Друкувати сторінку
3.1.2 Rack-mountable Installation in 19-inch Cabinet
The Switch can be mounted in an EIA standard-sized, 19-inch rack, which can be
placed in a wiring closet with other equipment. To install the Switch, please follow
these steps:
a. Attach the mounting brackets on the Switch's side panels (one on each side) and
secure them with the screws provided.
b.
Use the screws provided with the equipment rack to mount the Switch on the rack and tighten
it.
3.1.3 Power on the Switch
The Switch is powered on by the AC 100-240V 50/60Hz internal high-performance
power supply. Please follow the next tips to connect:
AC Electrical Outlet: It is recommended to use single-phase three-wire receptacle
with neutral outlet or multifunctional computer professional receptacle. Please make
sure to connect the metal ground connector to the grounding source on the outlet.
AC Power Cord Connection: Connect the AC power connector in the back panel of
the Switch to external receptacle with the included power cord, and check the power
indicator is ON or not. When it is ON, it indicates the power connection is OK.