Cisco ASR 5000 Посібник з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з монтажу для Шлюз Cisco ASR 5000. Cisco ASR 5000 37 сторінок. Applying power and verifying the installation
Також для Cisco ASR 5000: Посібник з монтажу (18 сторінок), Посібник з монтажу (33 сторінок), Процедура встановлення (8 сторінок)

Applying Power and Verifying the Installation

d) Repeat step a through step c for the second PFU.

Verifying the Installation

When power is applied to the chassis, power is provided to the upper and lower fan trays, and every installed

application and line card.

Each PFU, application card, and line card installed in the chassis has light emitting diodes (LEDs) that indicate

its status. This section describes how to interpret the LEDs to verify that all of the installed components are

functioning properly.

Important

Each PFU has a single status LED labeled POWER. This LED is green during normal operating conditions.

As the system progresses through its boot process, some cards may have no immediate LED activity. Line

cards have sporadic Link and Activity LED activity. It is recommended that you allow several minutes to

elapse prior to checking the LEDs on the various cards to verify the installation.

Verifying the Installation

ASR 5000 Installation Guide