Cisco DPC3848V Посібник користувача - Сторінка 43
Переглянути онлайн або завантажити pdf Посібник користувача для Шлюз Cisco DPC3848V. Cisco DPC3848V 50 сторінок. Wi-fi home gateway
Також для Cisco DPC3848V: Посібник зі швидкого встановлення (2 сторінок)
Друкувати сторінку
8
To specify DNS server address settings, do one of the following:
To get a DNS server address automatically using DHCP, click Obtain DNS
server address automatically, and then click OK.
To specify a DNS server address, click Use the following DNS server
addresses, and then, in the Preferred DNS server and Alternate DNS server
fields, type the addresses of the primary and secondary DNS servers.
To change advanced DNS, WINS, and IP settings, click Advanced.
9
10 When you are finished, click OK.
11 Try to access the Internet. If you cannot access the Internet, contact your service
provider for further assistance.
Configuring TCP/IP on Window s XP Sy stems
Click Start, and depending on your Start menu setup, choose one of the
1
following options:
If you are using the Windows XP Default Start menu, choose Connect to,
choose Show all connections, and then go to Step 2.
If you are using the Windows XP Classic Start menu, select Settings, choose
Network Connections, click Local Area Connection, and then go to Step 3.
Double-click the Local Area Connection icon in the LAN or High-Speed Internet
2
section of the Network Connections window.
Click Properties in the Local Area Connection Status window.
3
4
Click Internet Protocol (TCP/IP), and then click Properties in the Local Area
Connection Properties window.
5
Select both Obtain an IP address automatically and Obtain DNS server address
automatically in the Internet Protocol (TCP/IP) Properties window, and then
click OK.
6
Click Yes to restart your computer when the Local Network window appears.
The computer restarts. The TCP/IP protocol is now configured on your PC, and
your Ethernet devices are ready for use.
7
Try to access the Internet. If you cannot access the Internet, contact your service
provider for further assistance.
Configuring TCP/IP on Macintosh Sy stems
1
Click the Apple icon in the upper-left corner of the Finder. Scroll down to
Control Panels, and then click TCP/IP.
Click Edit on the Finder at the top of the screen. Scroll down to the bottom of the
2
menu, and then click User Mode.
3
Click Advanced in the User Mode window, and then click OK.
4
Click the Up/Down selector arrows located to the right of the Connect Via
section of the TCP/IP window, and then click Using DHCP Server.
OL-30 544 -01
Frequently Asked Questions
27