Digitus professional DS-55503 Посібник - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник для Подовжувач Digitus professional DS-55503. Digitus professional DS-55503 9 сторінок. 4k hdmi hdbaset extender set, 70m
Друкувати сторінкуPanel Description
1. TX Sender
① Power input
Transmission signal
②
indicator
③ HDBT Output
④ HDMI input
⑤ Reset button
⑥ RS232
IR receiver extension
⑦
cable interface
IR blaster extension
⑧
cable interface
Connect with DC 12V/2A power adapter (optional)
1. LED 1: It turns on when power on.
2. LED 2:
It turns on when the transmitter unit and the receiver
unit connect well with each other, and it flashes when
there is no transmission between the transmitter unit
and the receiver unit.
3. LED 3:
It flashes when the receiver unit connected well with
the HDMI display device, and it turns off when no
transmission between the receiver unit and the display
device.
To connect with receiver by network cable
Connect with HDMI source device
Press for restarting the unit
RS232 control
Connect with IR receiver extension cable. Please make
sure the remote control is within the required range of
IR receiver
Connect with IR blaster extension cable. Please put the
IR blaster close to source device to best transmit the IR
signal from receiver