Digitus professional DN-82123 Посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача для Конвертер мультимедіа Digitus professional DN-82123. Digitus professional DN-82123 4 сторінки. Gigabit fiber ethernet converter
Друкувати сторінкуInstallation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
Fiber interface is of duplex mode type, including two interfaces, namely TX and RX. When the
two sets of optical transceiver are interfaced or connected to switch with fiber interface, the
fiber is in cross connection, namely "TX-RX", "RX-TX" (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45
jack of the media converter through twisted-pair. The fiber device is connected to fiber
interface of the media converter. Then switch on. The corresponding LED is on for correct
connection. (See the table below for the LED indicator lamp)
Table 1: Front panel for single fiber media converter
Table 2: Front panel for dual fiber media converter
Table 3: Front panel for SFP fiber media converter