Cisco IG21-VZ-B-K9 Посібник з монтажу - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник з монтажу для Шлюз Cisco IG21-VZ-B-K9. Cisco IG21-VZ-B-K9 18 сторінок.
Друкувати сторінку
IG21, IG21R and IG31R Hardware Installation Guide
Mounting the Router on a Wall Using Two KeyHoles
Mounting the Router on a Wall Using Two KeyHoles
CAUTION: If you are mounting the router on drywall, use two hollow wall anchors to secure the unit to the wall using the two screws
included in the kit.
1.
The distance between the two hollow wall anchors should be 120 mm to match the distance between the two keyholes on the back of
the router.
(Figure
2.
Reserve a minimum of 4.5 mm distance between the screw heads and the wall
screw head thickness is 1.5 mm, the screw thread diameter is 4.0 mm and the screw length is 16.0 mm.
Figure 7
Back of Router Showing Two Keyholes for Mounting at 120 mm
Figure 8
Measurements for Attaching Two Screw for Keyhole Mounting to Wall
3.
To attach the router to the wall, place the two keyholes on the back of the unit over the two screws mounted on the wall. Then, pull the
router downward so that the router hangs from the screws
7).
(Figure
8). The screw head diameter is 9.8 mm, the
(Figure
9).
9