Cisco LINKSYS AG241 Посібник користувача - Сторінка 18
Переглянути онлайн або завантажити pdf Посібник користувача для Шлюз Cisco LINKSYS AG241. Cisco LINKSYS AG241 41 сторінка. Adsl2 gateway with 4-port switch
Друкувати сторінкуChapter 2
Denial of Service Thresholds
events you want to receive.
SMTP Mail Server
Enter the IP address of the SMTP
server.
E-Mail Address for Alert Logs
for alert logs.
Return E-Mail address
Enter the address for the return
e-mail.
To view the logs, click View Logs to display the System Log
screen.
System Log
Click Previous Page or Next Page to display the previous
page or next page in the system log. Click pageRefresh to
update the log. Cleck Clear to delete all entries in the log.
When you have finished making changes, click Save
Settings to save the changes, or click Cancel Changes to
undo your changes.
The Administration Tab > Diagnostics
The Diagnostics screen provides the Ping diagnostic tool
to allow you to check the connections of your network
devices, including the connection to the Internet.
Administration > Diagnostics
Ping Test Parameters
Ping Target IP
Enter the IP Address that you want to ping
in the field. This can be either a local (LAN) IP or an Internet
(WAN) IP address.
Ping Size
Enter the size of the ping packets.
Number of Pings
Enter the number of times that you
want to ping.
Ping Interval
Enter the ping interval in milliseconds.
SubProduct
Enter the thresholds of
Enter the e-mail address
Ping Timeout
Enter the time in milliseconds.
Ping Result
The results of the ping test will be shown
here.
Click Start Test to start the Ping test. The results will be
displayed in the Ping Result field.
The Administration Tab > Backup &
Restore
The Backup & Restore screen allows you to back up and
restore the Gateway's configuration file.
Administration > Backup & Restore
To back up the Router's configuration file, click Backup.
Then follow the on-screen instructions.
To restore the Router's configuration file, click Browse to
locate the file, and follow the on-screen instructions. After
you have selected the file, click Restore.
The Administration Tab > Factory Defaults
The Factory Defaults screen allows you to restore the
Gateway's configuration to its factory default settings.
Administration > Factory Defaults
If you wish to restore the Gateway to its factory default
settings and lose all your settings, click Yes. Then click
Save Settings to begin the restore process.
To cancel restoring the factory defaults, click Cancel
Changes.
Configuration
15