Cisco Linksys WAG325N Посібник користувача - Сторінка 31
Переглянути онлайн або завантажити pdf Посібник користувача для Шлюз Cisco Linksys WAG325N. Cisco Linksys WAG325N 50 сторінок. 2.4ghz wireless-n adsl2+
Друкувати сторінку
Wireless-N ADSL2+ Gateway
WEP
• Encryption. Select the appropriate level of encryption, 40/64-bit (10 hex digits) or 104/128-bit (26 hex
digits). A higher level of encryption is more secure.
• Passphrase. Instead of manually entering WEP keys, you can enter a Passphrase. It is case-sensitive and
should not be longer than 32 alphanumeric characters. (This Passphrase function is compatible with Linksys
wireless products only and cannot be used with Windows XP Zero Configuration. If you want to communicate
with non-Linksys wireless products or Windows XP Zero Configuration, make a note of the WEP keys
generated, and enter the appropriate one manually in the wireless computer or client.) If you want to use a
Passphrase, then enter it in the Passphrase field and click the Generate button.
• Keys 1-4. If you are not using a Passphrase, then manually enter a set of values. (Do not leave a key field
blank, and do not enter all zeroes; they are not valid key values.) If you are using 40/64-bit WEP encryption,
the key must be exactly 10 hexadecimal characters in length. If you are using 104/128-bit WEP encryption,
the key must be exactly 26 hexadecimal characters in length. Valid hexadecimal characters are "0"-"9" and
"A"-"F".
• TX Key. To indicate which WEP key to use, select a default Transmit (TX) Key number.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click
the Cancel Changes button to undo your changes. Click Help for more information.
Chapter 5: Configuring the Wireless-N ADSL2+ Gateway
The Wireless Tab
Figure 5-19: Wireless Security - WEP
25