Argos Linear 276/3503 Інструкція з монтажу Посібник з монтажу - Сторінка 11
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Внутрішнє оздоблення приміщень Argos Linear 276/3503. Argos Linear 276/3503 20 сторінок. 3 door mirror robe
Друкувати сторінку
Assembly Instructions
Step 12
Fit the back panels
a:
Square up the unit by
making sure that
measurement x:x equals
y:y.
Place the small back
and large back
down,
12
onto the unit as shown.
Make sure that the 2
backs are pushed up
tight against each other
and that they meet in the
centre of the divider's
back edge.
y
y
b:
Nail
around the
D
outside edges of the 2
backs.
Note: Do not nail where
the 2 backs meet and
nails should be spaced
about 150mm apart.
c:
Push the 8 nail
screws
through the 8
E
back holders
and tap
F
them down between the
small back
and large
11
back
and into the
12
back edge of the divider
.
.
2
Keep tapping the nail
screws
in until the
E
back holders
dig into
F
the small and large back.
Carefully stand the
unit up for the next
step.
a:
The measurement from top corner X to bottom corner X must be
equal to the measurement from top corner Y to bottom corner Y
b:
11
Note: If ever you need to take
the backs off to dismantle the
unit, the nail screws can be
taken out using a screwdriver.
c:
D
11
12
x
x
E
F
x
x
Note: These can
also be round
+
E
F
Warning: The
unit is heavy.
Lift with care.
E
F
11
F
12
y
y
10