Epson ProofPlus TM-H6000III Посібник з розробки - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з розробки для Сканер Epson ProofPlus TM-H6000III. Epson ProofPlus TM-H6000III 32 сторінки. Ecc printer
Також для Epson ProofPlus TM-H6000III: Посібник з експлуатації (27 сторінок), Брошура (2 сторінок), Технічні характеристики (2 сторінок), Брошура (6 сторінок), Посібник користувача (32 сторінок), Посібник з розробки (26 сторінок), Посібник з розробки (45 сторінок), Посібник (10 сторінок), Посібник користувача (29 сторінок)

notified by events.

This operation is the UPOS Release 1.7 and subsequent releases

applied operation.

•

"Issue an Error Event for specified error occurrence during Check

insertion." radio button

Under the setting that this button is marked, EndInsertion method is

considered to be succeeded upon normal completion of analysis of the

data that is read from a check inserted by the method.

When the read data of MICR is normal or the data contains not

analyzable characters, these conditions are notified by events.

Whether the read data and reading operation of MICR are illegal are

indicated by the set value of ResultCode and ResultCodeExtended

properties.

This operation is the same as the default operation of UPOS Release

1.6 (previous versions of Ver. 2.30) applied operation.

Default setting of above radio buttons is "Issue an Error Event for every error

occurrence during Check insertion.".

Regarding the variety of events and values of ResultCode and

ResultCodeExtended are described, please refer to the Section 8 of this

manual.

"Automatic check remove on read error" check box:

This check box setting can be done only when "Issue an Error Event for

specified error occurrence during Check insertion." radio button under "Error

handling options during Check insertion" is selected.

This check box is inapplicable when "Issue an Error Event for every error

occurrence during Check insertion." is selected.

When a read data is in those conditions as below, the check is removed:

1. The entire data is incorrect. (Neither an incorrect insertion, nor an

incorrect sheet, etc.)

2. Longer than the prescribed length

3. Blank check sheet

If one of the data is read as "?", the check will not be removed.

For the EPSON TM-U950, this setting is the default and cannot be changed.

The TM-U950 cannot translate error data as "?".

APPLICATION DEVELOPMENT GUIDE

MICR (EPSON TM Series)

Version 3.00 Feb. 2019