Digiview RCW17W Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Будильник Digiview RCW17W. Digiview RCW17W 7 сторінок. Jumbo atomic clock with indoor temperature

Друкувати сторінку

PRODUCT OVERVIEW

FEATURES

• Precise time and date set via RF signals from the US

Atomic Clock

• Calendar displaying date with month and day of the

week in English, Spanish, French, German or Italian

• Indoor temperature display with trend indicator

• User-selectable temperature display in Celsius or

Fahrenheit

• User-selectable 12 or 24 hour time format

• Wall mount or desktop option

FRONT VIEW

A. ATOMIC CLOCK WITH INDOOR

TEMPERATURE IN A TWO - LINE

LCD DISPLAY

MONTH

DATE

DAY

A T O M I C

C L O C K

Day of the Week

Calendar

Mountain Time

Central Time

Pacific Time

Eastern Time

WAVE

TIME SET

DOWN

RESET

°C/°F

LANG

MADE IN CHINA

AA/R6/IEC/UM3

WWVB RADIO CONTROLLED TIME

The NIST (National Institute of Standards and

Technology)radio station (WWVB) is located in Ft.

Collins, Colorado. It transmits an exact time signal

continuously throughout the most of the continental

United States at 60 KHz frequency. The Jumbo Atomic

Clock can receive this WWVB signal through the

internal antenna from up to 2,000 miles away. Due to the

nature of the Earth's ionosphere, reception can be

limited during the daylight hours. The radio controlled

clock will search for an alternate station that receives the

atomic time signal from the NIST Atomic clock in

Boulder, Colorado.The WWVB tower icon on the unit's

display will flash indicating a radio signal reception

from the WWVB station. If the tower icon is not fully lit,

or if the time and date are not set automatically, please

consider the following:

• During night-time hours, atmospheric disturbances

are typically less severe and radio signal reception

may improve. A single daily reception is sufficient

enough to keep the clock accuracy within 1 second.

• Make sure the unit is positioned at 8 feet (2 meters)

distance from any interference source such as a TV,

computer monitor, microwave, etc.

• Within concrete wall rooms such as basements or

office buildings, the received signal may be weakened.

Always place the Jumbo Clock near the window for

better reception.

REAR VIEW

B. TIME ZONE SWITCH

• Selects US Time Zone

C. WAVE/C°/F° BUTTON

• Selects the temperature display in Celsius or

Fahrenheit

• Activates atomic clock receiver

D. TIME SET BUTTON

• Allows to set clock manually

E. UP BUTTON

• Increases all function parameters

• Selects 12 or 24 hour time display format

• Activates atomic clock receiver

• Activates US Time Zone selection mode

F. DOWN/LANG BUTTON

• Decreases all function parameters

• Sets the language for the day of the week

G. RESET BUTTON

Time of Day With Seconds,

US Time Zone Map

• Resets all settings

Indoor Temperature

H. BATTERY COMPARTMENT

• Accommodates 2 (two) UM-3 or AA 1.5V alkaline

batteries.

I. UNFOLDING TABLE STAND

• Keeps unit in upright position on a flat surface

J. WALL MOUNT RECESSED HOLE

• Keeps unit on the wall

GETTING STARTED

BATTERY INSTALLATION

• Open the battery compartment door.

• Install 2 batteries (UM-3 or "AA" size 1.5V)

matching the polarity as shown in the battery

compartment.

• Replace the battery compartment door.

ATOMIC CLOCK

Immediately after batteries are installed, the atomic

time signal receiver will start to search for the time

signal. It usually takes between 5-8 minutes.

Once the atomic time signal is received, the date and

time will be set automatically, and the [ ] icon will

appear. If the time signal has not been received in 8

minutes, press MODE button to set the time and date

manually. After the clock is set manually, place it by

the window for the better reception. The atomic clock

receiver is rogrammed that it will continue to search

for the atomic time signal daily for every hour between

1:00 am and 4:30 am.

Once the time signal has been successfully received,

the time and date will be updated automatically.

CALENDAR AND CLOCK DISPLAY MODES

Precise time is displayed in hour-minutes-seconds

format on the top line of the Jumbo Clock.

The date is displayed in month-date format on the

bottom line next to the day of the week.

MONTH

DATE

DAY