Epson Stylus CX3200 Посібник з налаштування

Переглянути онлайн або завантажити pdf Посібник з налаштування для Сканер Epson Stylus CX3200. Epson Stylus CX3200 1 сторінка. Product support bulletin(s)
Також для Epson Stylus CX3200: Технічні характеристики (2 сторінок), Почніть звідси. (2 сторінок), Інформація про продукт (12 сторінок), Встановлення програмного забезпечення (20 сторінок), Посібник (11 сторінок), Оновлення (1 сторінок), Прочитайте це спочатку (2 сторінок), Бюлетень підтримки продукту (18 сторінок), Налаштування (2 сторінок)

Друкувати сторінку

Epson Stylus CX3200 Посібник з налаштування

Setup

4033391-00

xxx

Unpacking

ink cartridges

feeder guard

The contents may vary in certain locations. Remove all tapes and protective materials following the Notice Sheet.

Setting Up the Stylus CX

1. Unlocking

2. Attaching the Parts

Set the paper support to

align with the arrows on

this product.

Attach the panel in order to view the supported language.

3. Plugging in the Power Cord

4. Installing the Ink Cartridges

1. Press the P On button to turn on this product.

Stop

Return to Top

Error

Scan

Reset

Color

Recall

Copies

Save(3sec)

Reset all(3sec)

Enter

Value

B&W

Press the P On button.

2. Open the ink cartridge packages.

Do not remove the blue portion of the tape seal

from the top of the cartridges.

Do not touch this part.

Setting Up the Computer

1. Connecting

1. Turn off your Stylus CX.

Note:

Error

Scan

Recall

Reset

Save(3sec)

Reset all(3sec)

Do not turn on this product until a

Press to turn off.

message prompts you to do so.

2. Connect the USB cable.

Note:

If the "Add New Hardware Wizard" dialog box appears, click Cancel and

disconnect the USB cable from this product.Then return to step 1. Connecting.

USB cable

CD-ROM

paper support

Be sure to use the USB cable

that comes with this product.

3. Insert the ink cartridges as illustrated below.

Note:

Install both ink cartridges. This product does not work unless both cartridges are

installed properly.

4. Close the scanner unit.

Flashing

Error

Scan

Recall

Reset

Save(3sec)

Reset all(3sec)

Ink charging starts. It takes about one and a half minutes. While charging, this

product produces a variety of mechanical sounds. This is normal. When the P

On light stops flashing, ink charging is complete.

Caution:

Do not turn the power off during the ink charging process.

Do not load paper until ink charging is complete.

Note:

The ink cartridges packaged with this product are partly used during the initial

setup to fully charge the print head. This one-time process consumes a

considerable amount of ink but subsequent cartridge sets will last for their full

rated life.

5. Selecting Language

You can select your preferred language for use on the LCD panel. For details, see

Chapter 1 in the Copy Guide.

This product is now ready to make copies. See "Using the Copy Feature". If you want to

print data or scan images, set up your computer as described below.

2. Installing the Software

Caution for Macintosh users:

Turn off all virus protection programs before you install the software.

For Mac OS X users, see "Installing the Software for Mac OS X".

1. Make sure that this product is off.

2. Insert the software CD into the CD-ROM drive.

For users of Mac OS 8.6 to 9.x:

Double-click the EPSON icon in the EPSON folder.

3. The EPSON Installation Program dialog box appears.

Select Install Software, and then click

4. Follow the on-screen instructions.

5. For users of Mac OS 8.6 to 9.x

After installing the software, choose Chooser from the

Apple menu, and then select the icon for this product

and the port that this product is connected to.

Note for Windows users:

You may need to restart your computer while installing the software. If a message

instructing you to restart appears, remove the software CD, then click Restart. After

restarting make sure this product is off, then reinstall the software.

This product is now ready to print and scan. The Reference Guide includes detailed

information about printing and scanning. To view the Reference Guide, see "Viewing the

Reference Guide".

English

Using the Copy Feature

1. Preparation

power cord

Power cord may come

attached in some countries.

2. Making a Copy

Stop

Return to Top

Error

Scan

Recall

Reset

Color

Save(3sec)

Reset all(3sec)

Copies

Enter

Value

B&W

Press the P On button.

Select Various Copy Modes and Other Options

Error

Scan

Recall

Reset

Save(3sec)

Reset all(3sec)

Standard Copy

Scan

Recall

Save(3sec)

BorderFree Copy

Small Margin Copy

1 2

5 6 7 8 9

12 13 14 15 16

19 20 21 22 23

26 27 28 29 30

Installing the Software for Mac OS X

For users of Mac OS 8.6 to 9.x

1. Make sure that this product is off and insert the software CD into the CD-ROM drive.

2. Double-click the Mac OS X Driver folder.

Double-click your preferred language folder.

EPSON Installation Program

Double-click the EPSON TWAIN 5 Installer icon. Follow the on-screen instructions to

dialog box

install EPSON TWAIN.

If the Authorization window opens, click the key icon, enter the administrator's name

and password, click OK, and then click Continue.

3. After installing EPSON TWAIN, double-click the EPSON Scan to File folder in your

preferred language folder, and then double-click the EPSON Scan to File Installer icon

to install EPSON Scan to File.

4. After installing EPSON Scan to File, double-click the Printer Driver folder in the Mac OS

X Driver folder, and then double-click CX3200.pkg in your preferred language folder to

install the printer software.

5. After installing the software, follow the instruction below to select this product:

Double-click Macintosh HD.

Double-click the Applications folder.

Utilities folder.

Double-click the Print Center icon.

USB.

Select this product.

Click Add.

Cautions

to avoid damage to your

equipment.

Stop

Return to Top

Error

Scan

Recall

Reset

Color

Save(3sec)

Reset all(3sec)

Copies

Enter

Value

B&W

Press the Copies/Value buttons

to set the number of copies.

Copies/Value buttons

This product provides you with a variety of copying options. You can choose from various

formats and use many different types of paper.

Stop

Return to Top

1. Press one of the Menu buttons until

Color

Copies

Enter

Value

2. Press one of the Copies/Value buttons until the desired copy mode appears.

Stop button

B&W

3. Use the Menu and Copies/Value buttons to make other copy settings.

4. Press the Stop button. The settings you made appear on the LCD panel.

See the Copy Guide for the available menu items in each copy mode.

Menu buttons

Mirror Copy

You can copy the original image to various

sizes or types of single sheet paper.

Use the Copies/Value buttons to select

Standard from the Copy Mode menu.

Note:

In the Reduced Margin Copy mode, you can

make a copy with a 3-mm bottom margin on

Repeat Copy

paper.

You can copy to the full page (including the

margin area) of paper.

Use the Copies/Value buttons to select

Borderfree from the Copy Mode menu.

2-up Copy

Note:

Because this feature enlarges the image to a

size slightly larger than the paper size, the

portion of the image that extends beyond the

edges of the paper will not be printed.

You can make copies with a 1.5-mm margin

Auto Fit Page

around all edges of paper.

Use the Copies/Value buttons to select Small

You can make a copy with enlarging or reducing each page of your document

Margin from the Copy Mode menu.

automaticaly to fit the size of paper set in the sheet feeder.

Use the Copies/Value buttons to select Auto Fit Page from the Reduce/Enlarge

menu.

Viewing the Reference Guide

To learn more about this product, see the Online Reference Guide.

Double-click the EPSON TWAIN folder.

For Windows users

Double-click the EPSON TWAIN folder.

1. Insert the software CD into the CD-ROM drive. The Installer dialog box appears.

If the dialog box does not appear, double-click SETUP.EXE in the CD-ROM.

2. Select User Guides and click

For users of Mac OS 8.6 to 9.x

1. Insert the software CD into the CD-ROM drive.

2. Double-click the EPSON icon inside the EPSON folder, then select User Guides and click

For Mac OS X users

1. Insert the software CD into the CD-ROM drive.

2. Double-click the Manual folder inside the EPSON folder, then double-click the REF_G

folder in your preferred language folder. Then double-click the INDEX.HTM.

Double-click the

Click Add Printer.

Select EPSON

Cautions and Notes

must be observed

Notes contain important

information and useful tips on the

operation of this product.

Stop

Return to Top

Error

Scan

Recall

Reset

Color

Save(3sec)

Reset all(3sec)

Copies

Enter

Value

B&W

Press the B&W Copy button (to copy in

grayscale), or the Color Copy button

(to copy in color).

Copy Mode

appears on the LCD panel

You can create the mirror image of an original

image on Iron-On Cool Peel Transfer Paper

(image flipped from right to left).

Use the Copies/Value buttons to select Mirror

from the Copy Mode menu.

You can create multiple copies of an image on

a sheet of paper.

Use the Copies/Value buttons to select Repeat

from the Copy Mode menu.

You can put two pages of the original images

on a sheet of paper.

Use the Copies/Value buttons to select 2-up from

the Copy Mode menu.