DigiWeigh DW97PBM04 Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Ваги DigiWeigh DW97PBM04. DigiWeigh DW97PBM04 16 сторінок. Digital counting scales

SETUP

 The scales should be sited in a location that will not degrade the

accuracy.

 Avoid extremes of temperature. Do not place in direct sunlight or near

air conditioning vents.

 Avoid unsuitable tables. The tables or floor must be rigid and not

vibrate. Do not place near vibrating machinery.

 Avoid unstable power sources. Do not place near large users of

electricity such as welding equipment or large motors.

 Avoid high humidity that might cause condensation. Avoid direct

contact with water. Do not spray or immerse the scales in water.

 Avoid air movement such as from fans or opening doors. Do not place

near open windows.

 Keep the scales clean.

 Do not stack material on the scales when they are not in use.

 REMOVE the Shipping Protection Screw from the bottom of the

scale before using!

 Level the scale by adjusting the four feet. Center the bubble in the

spirit level located on the top surface of the scale. If the scale rocks

readjust the feet.

 The DW-97/98 Series comes with a stainless steel platform packed

separately. Place the platform in the locating holes on the top cover.

Do not press with excessive force as this could damage the load cell

inside.

 Attach the power supply cable to the connector on the bottom of the

scale. Be certain that it is firmly seated and that the shoulder of the

plug fits into the hole in the scale case. Plug in the power supply

module. The power switch is located on the bottom near the front of

the scale.

 The red battery charge light will come on whenever the scale is

attached to power.

Page 6 of 16