Epson 850N Короткий посібник - Сторінка 8

Переглянути онлайн або завантажити pdf Короткий посібник для Аксесуари для принтерів Epson 850N. Epson 850N 13 сторінок. Ink cartridge for use with epson stylus color printer
Також для Epson 850N: Інформаційний листок продукту (4 сторінок)

Друкувати сторінку

EPSON Stylus COLOR 850N

4. Open the printer cover and lift up the black ink cartridge

clamp.

5. Place the black ink cartridge in the holder with the label

pointing up and the arrow pointing to the back of the

printer. Then close the clamp, making sure it clicks into

place.

Caution:

If the ink cartridge holder moves back to the right before you install

the cartridge, don't try moving it back by hand. Press the

cleaning button and hold it down for 3 seconds to move the holder

back into position.

6. Now press the

color cleaning button to move the color

ink cartridge holder into loading position.

7. Repeat steps 4 and 5 to install the color ink cartridge. Then

press the

load/eject button to begin charging the ink

delivery system.

Charging takes up to 4 minutes. The

and the printer makes various sounds until it's finished.

Don't turn off the printer or interrupt the charging process

or it will start over, using more ink than necessary.

Caution:

Never turn off the printer when the

unless the printer hasn't moved or made any noise for more

than 10 minutes.

8 - EPSON Stylus COLOR 850N

black ink cartridge

holder

black

power light flashes

power light is flashing,

Removing and Installing an Ink

Cartridge

When the

black or

indicated cartridge is low on ink. This is a good time to make

sure you have a new cartridge. When the light stays on, the

cartridge is empty and you need to replace it.

Use these EPSON ink cartridges within six months of

installing them and before the expiration date on the package:

Black ink cartridge:

Color ink cartridge:

When you need new ink cartridges, contact your dealer or call

EPSON Accessories at (800) 873-7766 (U.S. only). In

Canada, please call (800) 873-7766 for dealer referral.

When the

color ink out light comes on, you can continue

to print with black ink. Simply turn the printer off and then

back on again. When you print, make sure you choose Black

as the Ink setting in your printer software.

Removing an Empty Ink Cartridge

You can replace a cartridge when the

out light is either flashing or on. Make sure the printer is

turned on and not printing before you start. Then follow these

steps:

1. Determine which cartridge needs to be replaced.

2. Lower the output tray and raise the printer cover.

3. Press the

black or

three seconds.

Caution:

If you press a cleaning button when no ink out light is flashing or

on, the printer cleans the print heads, as described on page 10. If

you need to replace an ink cartridge before the lights flash (because

the ink is too old, for example) follow the instructions under

"Replacing an Outdated Ink Cartridge" on page 10.

4/98

color ink out light flashes, the

S020108

S020089

black or

black cleaning

button

color cleaning

button

color cleaning button and hold it for

color ink