Epson C094001 - FX 870 B/W Dot-matrix Printer Технічні характеристики - Сторінка 4
Переглянути онлайн або завантажити pdf Технічні характеристики для Аксесуари для принтерів Epson C094001 - FX 870 B/W Dot-matrix Printer. Epson C094001 - FX 870 B/W Dot-matrix Printer 12 сторінок. Hi-capacity cut-sheet feeder
Також для Epson C094001 - FX 870 B/W Dot-matrix Printer: Посібник з монтажу (8 сторінок)
Друкувати сторінку
FX-870/1170
Bin capacity:
Single sheets:
Up to 50 sheets of 82-g/m' (22-lb) paper
Up to 150 sheets of 82-g/m* (22-lb) paper
Envelopes:
Up to 25 (plain and bond type)
Up to 30 (air mail)
MCBF:
100,000 cycles
Paper:
Paper
storage
Temperature:
18"
to
Humidity:
40% to 60% RH
Operation:
to 35°C (41" to 95°F)
5"
Storage:
-30" to 60°C
Humidity (without condensation):
Operation:
Storage:
to 85% RH
5%
Note:
C806381 or C806401
operating conditions.
Front sheet guide
Dimensions and weight:
Printer
No.
Standard C814001
48.5 mm
Wide
FX-870/1170-4
to 72°F)
(-22" to 140°F)
cut-sheet
and only at normal
feeders
Width
Depth
Weight
280 g
450 g
Paper:
Width
Paper length
Thickness
Weight
Printable area:
Single sheets:
Note: Front sheet guiak is available only at the normal operating
Character Tables
This section lists the character tables available in the ESC/P
mode.
You
select these character tables with the default-setting
can
mode or by using a software command.
All tables except the italic character table are the same as
PC437 table for hex codes 00 through 7F, so only the PC437
and italic tables are shown completely. The rest of the tables
show only the characters for hex code-s 80 through FF.
PC437 (USA, Standard Europe)
10/13/92
Single sheets
148 to 257 mm
(5.8 to 10.1 inches)
(5.8 lo 14.3 inches)
max. 364 mm
(max. 14.3 Inches)
0.085 to 0.14 mm
0.12 too.32 mm
(0.0025 to 0.0054 in.) (0.0047 to 0.0125 in.)
(40 to 58 g/m') x 4
(14 to 24 lb)
Same as single sheets from the top insertion.
(Multi-part forms)
9-Pin Printers