Epson C6000P Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари для принтерів Epson C6000P. Epson C6000P 8 сторінок. Roll to roll system

The Roll to Roll system specifically designed for Epson C6000P color label printer can handle

rolls up to 127mm (5") media wide and having an outside diameter up to 250mm (10"). Both

Unwinder and Rewinder are equipped with a fixed 3" core holder. An external power supply

100/240VAC - 2.5A

speed and sense of rotation auto adjustment.

LABEL UNWINDER INSTALLATION

at 24V allows an electronic circuit to provide, through the tension arm, the

If you do not have the printer

plate (JPL-6000P), place and

align the unwinder behind the

printer and than follow the

instructions from STEP 3.

STEP 1

Place carefully the printer into the lock guides.

STEP 2

On the back side, place and screw the

unwinder to the printer plate.

Do not tighten the knobs until the unwinder will

be properly aligned to the printer.

STEP 3

Remove the additional support and the outer

disk.

Now load both roll of media and outer disk

onto the core holder.

Tighten the core through the knob.